Water level sensor without a microcontroller

Hello there,
I need to make a circuit for alarming only high and low state of water level. For both of this levels I need to turn on a buzzer. When the water level is high the buzzer should turn on and when the water level is low a buzzer should turn on again. Can you suggest me a simple circuit diagram without any microcontrollers and is the following diagram possible in this case?

Thank you very much

One at full level, the other at empty level can directly drive the same or different buzzer each.

----> https://ko.aliexpress.com/item/32826756311.html

(One of the switches will have to mount upside down)