MikeMl Well-Known Member Most Helpful Member Apr 22, 2018 #1 4 pins. Contacts are on ~0.050" or ~1.2mm pitch. Width of socket (left to right) is 0.238" or ~6mm. These are on a little stepping motor bought on e-bay.
4 pins. Contacts are on ~0.050" or ~1.2mm pitch. Width of socket (left to right) is 0.238" or ~6mm. These are on a little stepping motor bought on e-bay.
S schmitt trigger Well-Known Member Most Helpful Member Apr 25, 2018 #2 Wish I could help you, Mike. Seems something custom or quite obscure.
Mickster Well-Known Member Most Helpful Member Apr 25, 2018 #3 Kinda looks like some type of a flat flex cable would go in there. EDIT: Found this, which could possibly be of help in identifying it. https://micros.com.pl/en/catalog/091092?page=1 Is there a part number on the motor, which may help to find out what it would be installed in? Last edited: Apr 25, 2018
Kinda looks like some type of a flat flex cable would go in there. EDIT: Found this, which could possibly be of help in identifying it. https://micros.com.pl/en/catalog/091092?page=1 Is there a part number on the motor, which may help to find out what it would be installed in?