Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

µwave Comm.

Status
Not open for further replies.
Cell phone booster: https://www.ubersignal.com/cell-phone-repeater

For WIFI, you can probably use a repeater. I use one at home. It actually sits about 5 feet from where i had trouble receiving a signal and I can have WIFI outside. A straight-line path would show way too many obstructions. 7 feet of earth and a 6" cement pad and a cinderblock wall for starters.

There are a few frequencies reserved in various bands that are unlicensed. e.g. the frequency that a microwave cooks at and say 14.56 MHz. I maintained/used an 1000 W "sputtering" transmitter at 14.56 MHz. This technology could be used to put the metal on a potato chip bag. It comes in 2 flavors DC sputtering and RF sputtering. DC is used for metals and RF for insulators and semiconductors. We used it for ZnO and ITO which are metallic transparent contacts. Mo was are primary DC target. You can actually sputter glass or place a thin coating of glass on things. There is no "information" transmitted at these frequencies.
 
0.4 kMc is definitely "old school" . I have an old AM radio marked that way kc or kcps , I'd have to look. But i had a wierd 3-band tube car radio by Blaupunkt that was marked in wavelength for AM/FM and SW. So, there isn't a 90.1 on the FM band.
 
Status
Not open for further replies.

New Articles From Microcontroller Tips

Back
Top