mikesmixes777
New Member
I am busy with an embedded web server, based on the TCP Stack 3.75.7e from Jorge.
I am using the PIC18LF2620, ENC28J60 and 25LC256 eeprom. I dont need a level shifter as the SPI is all 3.3Vdc.
Can I run the eeprom with Vcc=3.3Vdc without effecting the frequency that the main stack code uses. Also, can all the pins on the eeprom operate with 3.3Vdc?
Thanks
Michael
I am using the PIC18LF2620, ENC28J60 and 25LC256 eeprom. I dont need a level shifter as the SPI is all 3.3Vdc.
Can I run the eeprom with Vcc=3.3Vdc without effecting the frequency that the main stack code uses. Also, can all the pins on the eeprom operate with 3.3Vdc?
Thanks
Michael