T tkharoon New Member Apr 21, 2024 #1 I have attached an image of the circuit below. It is a up/down counter that counts from 0 to 99. It works perfectly when counting down, but when counting up, it goes ..., 39, 30, 41, 42 ... Any suggestions on how I could fix this. Attachments Screenshot 2024-04-21 at 15.50.04.png 186.5 KB · Views: 390
I have attached an image of the circuit below. It is a up/down counter that counts from 0 to 99. It works perfectly when counting down, but when counting up, it goes ..., 39, 30, 41, 42 ... Any suggestions on how I could fix this.
S sarahMCML New Member Apr 21, 2024 #2 You need to tie the Carry In and both Parallel Load/Enable pins to 0V. And don't leave the Jam Inputs floating. Upvote 0 Downvote
You need to tie the Carry In and both Parallel Load/Enable pins to 0V. And don't leave the Jam Inputs floating.