555 ic+output pulse after trigger pulse ends

Status
Not open for further replies.

Mindmywork

Member
im working on a circuit which will be triggered by cell phone audio output. im able to amplify the audio signal, the voltage has spikes in it from 1.6 to 4.5v when the ringtone is playing.
so can i take it as a input to 555 and get a pulse of 5 seconds as output.

output pulse should start after the ringtone ends.
 
How long does the ringtone last? Does it have gaps in it?
You might find you need two 555s: one triggered at the start of the ringtone and the other triggered when the pulse from the first one goes low.
 
crutschow said:
You mean when the ringing totally stops or at the end of the first ring?
If at the end of the ringing, what is the period between rings?
Click to expand...
after total ring stops. like i will call the mobile the ringtone plays and stops, after the ringtone stopped the output has to be triggered.
 
alec_t said:
How long does the ringtone last? Does it have gaps in it?
You might find you need two 555s: one triggered at the start of the ringtone and the other triggered when the pulse from the first one goes low.
Click to expand...
good idea. cant we do it with just a single 555
 
ringtone can be selected from files. but i dont know which sound form will get high voltage and has small spikes.
 
Status
Not open for further replies.

Similar threads

A
HELP.... the scheme and operation of the AC voltage regulator with pulse-width control on the active load. + time charts ))
Replies
17
Views
22K
danadak
O
  • Question
y<=(a and b) xor (not b and c);What's the output of this VHDL code?
Replies
7
Views
9K
ZipZapOuch
V
COMPARE THIS TWO SIGNAL TO CREATE SPWM PULSES OUTPUT
Replies
17
Views
4K
crutschow
square wave pulse detector using PIC16F676
2
Replies
25
Views
5K
Pommie
P
Delay off after the input pulse completed with 555ic
2
Replies
20
Views
4K
Mindmywork
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…