Amplification of High frequency wave

[saurabh17g]

I want to amplify a wave of 10MHz frequency. Readily available opamps like 741 and op07 wil not serve this requirement. Please suggest me better opamp which is readily available.

 

[MikeMl]

**broken link removed** with TI's Selection Guide.

 

[Nigel Goodwin]

You really need to give FAR more details, your question is much too vague to answer.

 

[Hero999]

Input/output impedance?

Input voltage? Gain?

Wave shape, sine, square or complex?

 

[Ubergeek63]

https://www.electro-tech-online.com/custompdfs/2010/04/LMH6714.pdf

https://www.ti.com/lit/gpn/OPA684

while there are some quirks with current feedback amps, the most notorious of them is the prohibition on reactive elements in the feedback loop, they are much easier to keep stable and achieve higher gains at higher frequencies than VF in general.

dan

 

[saurabh17g]

@hero
wave shape= sine
gain= around 100 to 1000

@nigel
will you please elaborate on 'FAR' as to what exactly you need

 

[mneary]

Must we also guess what your input and output maximum voltages will be? If it is a sine wave, may we guess that response above and below this frequency is not required?

 

[Nigel Goodwin]

@hero
wave shape= sine
gain= around 100 to 1000

@nigel
will you please elaborate on 'FAR' as to what exactly you need

You've told us almost nothing about the requirement, even the extra information above isn't anyhere near enough - for a start we need to know EXACTLY what it's for.