Hi every body,
Do u know various ways of buliding PCBs such as preparing zinc, printing and drilling. I'm intrested to know how companies do that. I need to make a large amount of PCBs every day.
Hi every body,
Do u know various ways of buliding PCBs such as preparing zinc, printing and drilling. I'm intrested to know how companies do that. I need to make a large amount of PCBs every day.
there are various ways of making pcb's one method is silk screen method.but this is having a large process little bit hard to do at home unless you having all the tools & some support.In simply the layout is taken into a silk screen by(heat exposure or some UV rays).then the silk screen is used as a stencil to draw in the copperboard.placing the screen on the copper board & with a waterproof ink its painting all over the stencil.simply the stencil is removing upwards then only the tracks will remain.with this stencil can make about 1000 boards.but it needs some effort & experience.
At home the easiest way is the tonner transfer method.search in the google there are plenty ways.
Thanks Gayan. Any body could guide me about soldering ways too. I've heard that there are something like small pools of solder. But I don't have enough information about this way and don't know it's english name.
Hi every body,
Do u know various ways of buliding PCBs such as preparing zinc, printing and drilling. I'm intrested to know how companies do that. I need to make a large amount of PCBs every day.
I can't open the above websites but http://www.technologystudent.com/pcb/pcb1a.htm
This web site is very usefull abou making PCB but the only way for sticking components on PCB is identifyed normal soldering in this web site.
What other ways are possible?