Can anyone pls buy these

A

akein lithmal

New Member
Hi,

Ive been having these for so many years and i need to get rid of them

7$ each for big ones


pm me for more details
 

Attachments

  • IMG20250317171928.jpg
    4 MB · Views: 50
  • IMG20250317171939.jpg
    4.3 MB · Views: 51
They look like obsolete thru-hole scrap with no residual value. Bin 'em and forget 'em.
 
Papabravo said:
They look like obsolete thru-hole scrap with no residual value. Bin 'em and forget 'em.
Click to expand...

A bit harsh

Nothing wrong with through-hole - however, presumably the selection of chips was for a specific project, long since uncompleted. As they are 26 years old they are probably of little use now, and of little or no value.

Like anything else, things are only worth what someone is willing to pay, and finding someone interested in old chips is probably unlikely.
 
Nigel Goodwin said:
presumably the selection of chips was for a specific project,
Click to expand...
Disagree. They look like free samples still in the original Maxim plastic boxes. Maybe requested for a specific project, but more likely acquired for an unknown future project that never materialized.

BTW, not all carbon-impregnated forms were created equal. Over decades, some can actually dissolve component pins. Old TI foam still is good, while old RCA and Motorola foam is terrible.

ak
 
granddad said:
Its difficult to bin old silicon ...
Click to expand...
granddad said:
Its difficult to bin old silicon ...
Click to expand...
AnalogKid said:
Agree. Kids these days . . .

ak
Click to expand...
Papabravo said:
They look like obsolete thru-hole scrap with no residual value. Bin 'em and forget 'em.
Click to expand...
To me they are expensive but i dont need them
 
Last edited:
Maybe List what they are ... i.e. LCD driver, 555 Timer, Step-Up switching controller, Decade Counter, 4-Digit presetable Up/Down counter, Hi performance Op Amp, UA Op-Amp

Still. for me, there isn't much I would use out of that these days, but someone else might.
 
Reality is harsh. Nobody has manufactured much of anything thru-hole for at least a decade. Useful for a prototype or in a hobbyist's junk box perhaps but expecting $7 for them is pretty unreasonable. I pitched my vast collection over the last three years.
 

Almost all our small scale manufacturing is through-hole - only parts that are SM only get used as SM parts. Hand building SM boards is too time consuming.
 
Small scale manufacturing is pretty close to being an oxymoron. It's not really manufacturing, more like a hobby or vanity enterprise.
 
Our "Small scale manufacturing" products are part of packaging lines worldwide - anything you buy in sealed polythene bags such as frozen food has a good probability of being made on a machine that includes our polythene welding controllers. Also used for numerous varied things from bank cash bags to cold weather survival kits.
 
You must log in or register to reply here.

Similar threads

D
  • Solved
Do you know where I can buy a small PMSM for a motor control project?
Replies
3
Views
2K
DaveElectronics6XT
D
A
  • Question
Question laptop hdd2.5" buy in aliexpress
Replies
10
Views
3K
Tony Stewart
  • Question
What can be a cheaper alternative to IC 5L0380R?
Replies
14
Views
6K
electronium
M
  • Question
Understanding a simple electronic device
Replies
2
Views
1K
camerart
G
Where do you people buy electronic parts in USA?
2 3
Replies
41
Views
12K
For The Popcorn
F
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…