Hi all
Thanks for all your posts.
Just to let you know, i got it working just the way i wanted.
However, one thing i noticed is that when it was hooked up, you press the button and the 1st led lit up, it moves to the 2nd, then the 4th and the the 10th.
The strange thing was, when i moved the wire from position 13 on the 4017 chip (enable) to the button, and move the posi 14 (clock) to the switch on the enable circuit, it works perfectly, moving the light to the next led like it should. I cant work it out, and well to be frank, cause it is working , i couldn't give a stuff, but it is just wierd.
Thanks again.
Andrew D