Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Compiling and Building Problem .Hex And .rom error Please Help me

Status
Not open for further replies.

Haydar5988

New Member
Hello I work at a electronic company.I copied some code projects on network to my desktop.I can't compile all code and building.How can i my problem
WhatsApp Image 2023-11-30 at 09.47.36.jpeg
WhatsApp Image 2023-11-30 at 09.47.36 (1).jpeg
 

Attachments

  • WhatsApp Image 2023-11-30 at 09.47.36.jpeg
    WhatsApp Image 2023-11-30 at 09.47.36.jpeg
    174.4 KB · Views: 199
Check that there are not old output files, that are read-only?
(Or the target directory is read-only or owned by a different user).

That's possible if the whole directory was copied from a different machine.
 
Check that there are not old output files, that are read-only?
(Or the target directory is read-only or owned by a different user).

That's possible if the whole directory was copied from a different machine.
How can learn this situation.How i can learn read-only selection?
I copied old programs to desktop.I can compile and build it at now.But İf I copy a new code to a folder,I can not compile and build it.
 
Unless it's an existing project with exactly the same file & directory locations, the easiest way is to create a new project first, create each file using the file menu so it is part of that project, then copy the content of the old file to it.

Other than that you will have to edit the project content and settings and check or correct every file location.
 
Unless it's an existing project with exactly the same file & directory locations, the easiest way is to create a new project first, create each file using the file menu so it is part of that project, then copy the content of the old file to it.

Other than that you will have to edit the project content and settings and check or correct every file location.
"Other than that you will have to edit the project content and settings and check or correct every file location."
I think that my problem is here but i dont know how to solve it.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top