Hello,
I am using a Meanwell Power Supply to feed Power Into my Batteries, for my inverter for when there is no sun. (It's a 27V unit rated 350Watts)
I have rotated the POT to output 23.6v
so the unit will not send power above 23.6v, but under, you can imagine it will feed whatever is being used...
the problem is, when the batteries volt gets too low, the meanwell Power goes more then my desired Feed Back.. sometimes seeing 600watts at the input..
I wish to limit the current to 12A or thereabouts.
any ideas of a simple product can do this? on the cheap.
I looked at this.. transzorb 12A but something tells me Not for what I need.
**broken link removed**
thanks guys..
Shaun