Eagle Files for Mondo SuperProbe

[FONT=Arial, Helvetica, sans-serif]There has been interest regarding the SuperProbe in another thread.

This is the design for a 17 function probe[/FONT] designed around a PIC16F870, a 4 digit LED display module and little else.

Circuit Design by [FONT=Arial, Helvetica, sans-serif]Luhan Monat at Mondo Technology[/FONT]
[FONT=Arial, Helvetica, sans-serif]My contribution is converting the schematic to Eagle and the PCB layout.

The PCB is a 1" by 3.5" DIY DS board. The down side is that there are 30 vias.

I am still looking for a suitable case and am willing to redo the board should one become available.
[/FONT]

as per the spec superprobe,
"When an inductor is connected from the tip to the ground lead, and button #1 is pushed, its value is displayed. Values from 0.1 to 999.9 millihenries are displayed. "

it can resolve .1mH

while the other one under concern can measure 10nH minimum-- while the original design of AADE.com can resolve .1nH

This site contains lots of FREE electronic circuits ircuit diagrams for hobbyists, students, professionals etc. covering a wide range of categories in electronics like audio, music,home/garden related,computer hardware,radio,robotics etc to name a few. There are also links to sites that offer hobby electronic kits and other electronics hobby related stuff. Use the menu on the left to browse different circuit categories. You can view the entire electronic circuit schematics **broken link removed**.