CAPs are 440-516mF, 110-125VAC and strangely were wired in series 100%. Wire#8 into cap and wire#9 out of second cap.
it is a GE Triclad Induction motor.
3HP, 230VAC, 17A, Cont Duty, Type KC, Frame 184T
Model number: 5KC184AL3050 (zero info out there that I could find)
There’s bearing numbers on name plate for both ends of motor which tells me age is up there because it’s maintainable.
On name plate also has “conndiag#”
Which I interpret connection diagram??
# is 733A350 but I’ve found zero info on as well.
The electronic potential relay is in pics and I find zero info on as well. It has 2 black wires that I feel are coil inside ? And opposition side is a red/white which I believe to be contacts open/closed. ( no power as device sits contacts are open tho another confusing thing to me) but without diagram hard to say if it’s correct/good/damaged etc?
Just another note there is no centrifugal switch I was confused on this above but as you gents said that’s what electronic relay (S4 power Device, model c-20) is for sorry this thing has me quite confused and worked up ha.