Dr_Doggy
Well-Known Member
first i have a full bridge rectifier, but it needs a smoothing capacitor, it rectifies ac120, and runs at 15amps max,
the second caps i need i was told;
The local supply capacitors need to be rated for the rms current they will have to carry, to be on the safe side just figure they need to be rated for the same as the dc current flowing into the supply. Their parasitic inductance needs to be kept very low as well.
these are 5 in series,
could someone pick out proper ones for me @ digikey,, this is something i dont trust myself doing....
the second caps i need i was told;
The local supply capacitors need to be rated for the rms current they will have to carry, to be on the safe side just figure they need to be rated for the same as the dc current flowing into the supply. Their parasitic inductance needs to be kept very low as well.
these are 5 in series,
could someone pick out proper ones for me @ digikey,, this is something i dont trust myself doing....