ok, well here is the schematic the guy gave me for a 1800watt induction heater, the best i can run off my 15 amp surge protected power bar(120volts?)60hz,,
**broken link removed**
he said to rate the series caps for the rms aswell, there will be 5 h-bridges, not like 3 in the schematic, i have labeled the series caps in question as c2, he said to just rate it as the dc current of the supply?!?
the schematic he gave me was only semi, but if we can get those caps down, i should be able figure it out.... the green WAS where my questions lay, but i got a quick tutorial on the coils,
im also not sure about what voltage i should step down to at the work coil or how to limit the current at the supply,
ill admit this circuit is advanced for me, but i am doing this because i am more interested in the fields it produces...