Hi all...I'm trying to get this display working...it's from an HP printer (can't remember the model#)
Numbers on the PCB are, C8413-60153 AX4 as well as some random numbers on the back.
I searched for the numbers on the PCB over the net with no luck. Someone said that some of these are generic and one should be able to figure out which contacts are for connecting to in order to get it working (over what protocol?? i2c,serial,rs232..etc...I have no idea). Does anyone know how to get this display working? Pictures are below:
The one problem you may encounter is that your particular LCD module appears to use zebra strip to connect it to the motherboard, and so it may use a non standard arrangement of signal pins.
Thanks BobW, I wish I could spend the time to put two and two togther and get this thing working but I was hoping there was an entire sheet for the entire display not just the controller (since I don't know which pins are which in this case....Perhaps there's not even 1 sheet covering the entire circuit I have here...I was hoping it was like an off-the-shelf display but now I'm thinking it is a part that was designed for specifically for HP...?
There are zillions of those alphanumeric LCD displays around. Though generally, the PCB has a standard pinout making them very easy to use. But, I haven't seen one that used that style of connector. Plus it appears to have twice as many connections as the more common type. Maybe one of the other members here has seen this type. You can buy the standard type so cheaply that it's hardly worth the effort to reverse engineer the oddball ones.
You may want to check out this site for other info on LCD display modules: https://symlink.dk/electro/hd44780/
Maybe it'll give you some ideas.