billericayboy
New Member
Hi, i am looking at the buried wire fence problem for my mower-bot and have found the following schematic but am not practiced at biulding citcuits.
Can anyone give me advice on making it and getting it to work.
http://www.betuwe.net/~mowbot/UDO5transSch.PDF
http://www.betuwe.net/~mowbot/UDO5recvRcv.PDF
The idea is that you have a wire under the lawn and the robot goes up to it and then turns around and goes in another direction without crossing it. In another mode it will follow the wire to around the preimeter to cut the edge.
Any help would be apreciated.
Richard - UK
Can anyone give me advice on making it and getting it to work.
http://www.betuwe.net/~mowbot/UDO5transSch.PDF
http://www.betuwe.net/~mowbot/UDO5recvRcv.PDF
The idea is that you have a wire under the lawn and the robot goes up to it and then turns around and goes in another direction without crossing it. In another mode it will follow the wire to around the preimeter to cut the edge.
Any help would be apreciated.
Richard - UK
