Hi all,
i wanted to control the power wich goes to a StarterMotor...
i wanted to control its RPM/Power by using a Pic Micro with PWM output..
because içant use relais.. i was thinking on hooking up some Mosfets in parralel to be able to cope with the Amps....
i was thinking of using a 12volt DC motor ..lets say 900watts?? (75Amps??)
for example a BUZ11 can have 30amps..(with cooling offcourse)
so i will need 3 of them in parrallel is that true?? (90Amps, bit over powered??)