RE: ADC interface
First, Thanks Papabravo for your help!
This is my first A/D project so please hang in here with me, thanks.
I do not have a specific numbered A/D converter picked out yet other than thinking I would like a flash type. I'm open to suggestion though.
By my calculations an 8 bit, being the most common, should be needed to accomodate the amount of voltage counts/steps that I need to read. That being 100.
About the digital counter, sorry I should have explained better. I indend to used the standard pulse train to bcd decoder to lcd driver type system. Here again I'm open to suggestion.
Yeah I was starting to think a micro-controller of some type might be the way to go. Along with project cost, ease of construction is a concern. It would be desirable if there could be some sort of reasonable balance.
You are right, some sort of pulse train converter.
Thanks again for your thoughts!