A adamadam New Member Dec 10, 2010 #1 Hey, I have an 11.1 voltage detector for my li po batteries, only problem is that its from 3s-6s and my li po is 2s, So i was wondering if theres a way to trick the detector in thinking my li po is 3s Thanks
Hey, I have an 11.1 voltage detector for my li po batteries, only problem is that its from 3s-6s and my li po is 2s, So i was wondering if theres a way to trick the detector in thinking my li po is 3s Thanks
A adamadam New Member Dec 11, 2010 #3 nope not triying to make fire at all, just trying to protect my li po batteries
C cowana New Member Dec 11, 2010 #4 There should be a resistive potential divider inside the detector - you just need to swap a few resistors around. Be careful, lipos aren't to be messed with!
There should be a resistive potential divider inside the detector - you just need to swap a few resistors around. Be careful, lipos aren't to be messed with!
A adamadam New Member Dec 11, 2010 #5 thats easier said then done, its all electrolytic and soldered on a tiny PCB