I have a Philips DVD player and i want to build a simple IR transmitter circuit bord so that i can control the player with a PIC microcontroller [PIC16F84A] instead of the remote control, but i don't know how to get started. The DVD player is fairly new so i think that the remote control protocol is Philips RC-6 but i am not sure.
I guess first step would be to copy the signal of every button on the remote control so i would be able to program the PIC with the correct information, and it can deliver this to the IR transmitter when asked to do so. Does anybody have any ideas on how to do this? [not the programming part, but on how to get the signals from the remote control into the computer, so i have some data to work with]?
Any ideas ar welcome, also ideas on how to build the IR transmitter part.
If you have a microphone input (like the line-in input, but has a bias current for the mic) on your computer, you can connect a phototransistor across the input (you might need to try connecting it both ways) and record the waveform with some PC sound recording software (which you can use to view it also).
If you have a microphone input (like the line-in input, but has a bias current for the mic) on your computer, you can connect a phototransistor across the input (you might need to try connecting it both ways) and record the waveform with some PC sound recording software (which you can use to view it also).
Yep. Works like a charm. Due to the slow response of the phototransistor & soundcard, the carrier is not present in the signal - just the modulation/data. If you can program, you can extract the data automatically from the wav file (just use a simple [[software]] schmitt trigger type detector)
Edit: I'm not sure if I tried it with an RC-5/6 remote, but it worked for all the remotes in the house.
I must say that your tutorials are very impressive, i definitely want to build some of these projects.
I know that the 16F84 is starting to go obsolete, but i really like this chip, and i have some many of them, that i can build a small house.
I found this on your site and is seems to be exactly what i need for the hardware part, i want to make it as simple as possible therefore i have tried to remove the reciever part does this look right?
I must say that your tutorials are very impressive, i definitely want to build some of these projects.
I know that the 16F84 is starting to go obsolete, but i really like the chip, and i have some many of them, that i can build a small house
I found this on your site and is seems to be exactly what i need for the hardware part, i want to make it as simple as possible therefore i have tried to remove the reciever part, does this look right?