isis simulation problem

I

illias28

New Member

• Dec 18, 2019

• #1

Hi every body,
can any one help me please, i want to simulate the Following schematic with pic 16f84a, a modulo 100 with displaying the results on tow 7 segments in multiplexed mode .but the simulation doesn't work.here you will find the schematic and the hex file.
and thank you very much

 

Attachments

• affmux.hex

  1.6 KB · Views: 271
• affmux.c

  1.1 KB · Views: 286
• affmux.BMP

  355.3 KB · Views: 287

Ian Rogers

User Extraordinaire

Forum Supporter

Most Helpful Member

• Dec 19, 2019

• #2

Nowhere near enough info.... I can't tell what the seven seg is... You have no chip data in your code... Where did you download this...

 

Electro_Hero

New Member

• Dec 26, 2019

• #3

What is the resource of your code? Is it complete?

 

I

illias28

New Member

• Dec 26, 2019

• #4

I WROTE MY PROGRAM WITH MIKCROC .
ON MY BREADBOARD THE CIRCUIT IS WORKING GOOD BUT NOT IN THE SIMULATION WITH ISIS

 

Ian Rogers

User Extraordinaire

Forum Supporter

Most Helpful Member

• Dec 26, 2019

• #5

illias28 said:

I WROTE MY PROGRAM WITH MIKCROC .
ON MY BREADBOARD THE CIRCUIT IS WORKING GOOD BUT NOT IN THE SIMULATION WITH ISIS

Click to expand...

Right! Simulation has to be treated carefully... You may have to edit the LED component to see anything... Whereas a real component may show dimly the ISIS component will have difficulty.. Try and change the duty cycle to see if it helps...

 

I

illias28

New Member

• Dec 26, 2019

• #6

thank you very much ,Ian rogers for your help,
i found that the probleme was with the version of proteus, i have version 8.8 installed on my pc .
i tried the same simulation on a friend's pc who has proteus version 7.6 and it works good.