nuclearrambo
New Member
I constructed this circuit Chapter 10: Computers and Electronics -- homemade electronic digital thermometer
But at the output pin i am getting around 148.4 mV.
Temperature here is around 30.0 C which converts to 86 F.
So accordingly my output should be 860mV.
But i am not getting so.
If I connect a 9V battery, the sensor overheats. So currently i am using 6V battery.
What could be the problem?
But at the output pin i am getting around 148.4 mV.
Temperature here is around 30.0 C which converts to 86 F.
So accordingly my output should be 860mV.
But i am not getting so.
If I connect a 9V battery, the sensor overheats. So currently i am using 6V battery.
What could be the problem?