I want to make 3 clocks by the use of avr microcontroller.the freuencies are as below:599.995kHZ,428.539kHZ and 3kHZ.
the generated clocks must be continuously and simultaneously accessable.i want to know, is it possible to generate these clocks by the use of a single micro ,and how it is possible. i woud be grateful if yoy introduce some sites which have done projects in this field.
Re: making 3 diffrent continuouse clocks by the use of avr m
kaveh said:
hello
dear sir or madam
I want to make 3 clocks by the use of avr microcontroller.the freuencies are as below:599.995kHZ,428.539kHZ and 3kHZ.
the generated clocks must be continuously and simultaneously accessable.i want to know, is it possible to generate these clocks by the use of a single micro ,and how it is possible. i woud be grateful if yoy introduce some sites which have done projects in this field.
It can be done by using Timers in PWM/Wave Form Generator Mode of AVR but you will have to choose high end processor which provides at least 3 output compare units on high resolution timer (for accuracy). Study timer section of Atmega128's datasheet to know more about it.