This 1N60 has a gate threshold voltage of 2 to 4V. Yet when I apply 3.3V at the gate, there remains 1.6V across drain-source; when 4V is applied, there remains 1.5V, when 5V is applied, the voltage drops to 0.3V approx. The load is 10mA. Is this normal behaviour?
I've added a few filters to MikeMl's DigiKey recomendation. First, go to Change Country in the top right of the screen and select Belgium/Euros.
You can pick from the shortlist of the filtered parts, further refine the filters, or open the choices up by unchecking the Applied Filters that I've preselected.
You don't have to buy from digikey. You can use their parametric search tool to find part numbers, and then go shopping elsewhere.
I've added a few filters to MikeMl's DigiKey recomendation. First, go to Change Country in the top right of the screen and select Belgium/Euros.
You can pick from the shortlist of the filtered parts, further refine the filters, or open the choices up by unchecking the Applied Filters that I've preselected.
You don't have to buy from digikey. You can use their parametric search tool to find part numbers, and then go shopping elsewhere.