This is the coil I just got. Hopefully, it will work for this project.
**broken link removed**
Printed on it is 10A 250VAC, 10A 125VAC, 10A 30VDC, 10A 28VDC and in more bold print SRD-05VDC-SL-C. I could not find a data sheet for it.
The back of this part shows a pin on either side of the coil and the top has an indentation directly above one of those pins. I assume the indentation indicates polarity, but is it + or -? There’s also a third pin between the coil pins that connects to half of the switch, so I guess that pin can be left disconnected.
The fourth and fifth pins (for the switch) have symbols that closely resemble your schematic, so I think I’m OK there.
The appliance timer only shows L (which I assume means live 110V AC). No ground and no neutral going into the appliance timer? I just want to be sure before chopping things up.
Thanks a million!