I'm currently working on a project and i have made the schematic but i'm having problems with the pcb design, i never made one before so it's really hard and i'm making all kinds of mistakes
I've made it in proteus (schematic in isis, pcb in ares)
can somebody help me with positioning the parts in the pcb and connecting them?
it should be on 1 layer with as less bridges as possible.
Have you considered using one of the countless Eagle tutorials on the web for your PCB? The time you spend to learn the tool and read the tutorials will probably get you there faster than somebody here doing the board for you (unless there is somebody with a ton of spare time). There are even Eagle tutorials to help you use the router to generate a breadboard / stripboard circuit.
Hey great but i'm working with proteus.. eagle tutorials aren't so helpful then..
If someone just can put the parts on the right place it would help alot!
Hey great but i'm working with proteus.. eagle tutorials aren't so helpful then.. If someone just can put the parts on the right place it would help alot!
The MCLR pullup at 110K is very high and may not function properly.
The 18F4520 has an enhanced PWM module, your H-Bridge shoud use the P1ABCD pins.
Missing the diode clamps on the relays (hope they're less than 20mA on the coil)
Why double up the RX line on the MAX232?
Looks like a line follower robot schematic and homework.