PCB123 question

I have just started to use this program (free version) to draw schematics.
Maybe somebody here with more experience knows the fix to the problem I encountered:
When placing a part from the library (Op Amp - for example) and then rotating it for correct orientation, the part number gets rotated also but the pin numbers do not.
So, with 180 deg. rotation, I end up with upside down pin numbers.

Is there a way to delete the pin numbers from the library parts? Or any other clever fix to get around this shortcoming?

Thanks for reading this,
Klaus

I'm not sure if this will solve your problem, but try using the "mirror" button instead of the rotate.