Pic12f629 counter

[Transistorman]

i just make a schematic

**broken link removed**
it is PIC12F629 counter
but i really new in pic
is these schematic right ?

 

[Pommie]

No, that won't work. GP3 is also MCLR but can be configured as an input. It cannot be an output and so you should use GP 0, 1, 2 & 4.

Edit, Suggested solution highlighted in answer to the next post.

Mike.

 

[Transistorman]

what is your suggestion

 

[Pommie]

what is your suggestion

See above.

 

[Transistorman]

i just the schematic **broken link removed**
are it still wrong
i want to ask are gp5 is a output too

 

[Pommie]

If you look in the data sheet you will find the attached diagram. Note how all the GP pins have arrows both ways except GP3 which only has an arrow in. So, yes, GP5 can be an output.

Edit, your diagram should work now. However, why not use a bigger chip (16F628a) and drive the display direct.

Mike.

 

[Transistorman]

thanks for the correction