Attached are 3 blocks of the model.The input is given to the PIP_STAGE1 either a sine wave or a dc voltage.This stage consists of a sample and hold,SUB ADC and Sub DAC.The bits from Sub ADC D1 and XOR output are send to the delay blocks.The delay blocks are provide delay to each stage from 9,9 to 1 delay cycles.The last stage of the input stage is a 2 bit flash ADC
The output of the delay blocks are given to the error correction.The 2 inputs to the error correction are from the delay blocks.the 10th bit is not passed through the error correction.The final outputs obtained from the error correction is sent to he scope.
Let me know if any more info is required of me.Thanks a lot once again.