Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Problem measuring AC channels drops with a Raspberry PI

Status
Not open for further replies.
Liken said:
Do I need to calibrate
Click to expand...
You can add a simple resistor and change the delay time. If you want to hand solder one resistor.
KeepItSimpleStupid said:
I want to make you aware of this:
Click to expand...
Post #20 is very close to what is on the board. The schematic in post #1 is not what is on the board. What is on the board is in post #12.
What KeepItSimple posted will have the same problem. The opto, used like this will have a 2:1 variation in delay alone, if all other parts are perfect.
 
Status
Not open for further replies.

Similar threads

N
  • Question
Connector Polarity for AC signals
Replies
5
Views
523
MrAl
M
C
Components for AC-DC rectifier
Replies
13
Views
1K
danadak
danadak
S
  • Question
Wierd grounding problem with laptop
2
Replies
23
Views
7K
Tony Stewart
Tony Stewart
ThomsCircuit
AC/DC Transformer with 240V output
2 3 4
Replies
63
Views
13K
ThomsCircuit
ThomsCircuit
M
  • Question
Controlling servo motor wirelessly with a potentiometer
Replies
11
Views
1K
aliarifat794
A

Latest threads

New Articles From Microcontroller Tips

Back
Top