C chintan_jagani New Member Mar 10, 2007 #1 Can anybody provide me with a schematic to convert the RS232 signals from an RS232 device to RS485 using the MAX213 (RS232 transceiver) & SN75176 (RS485 transceiver).
Can anybody provide me with a schematic to convert the RS232 signals from an RS232 device to RS485 using the MAX213 (RS232 transceiver) & SN75176 (RS485 transceiver).
E elcopart New Member Mar 10, 2007 #2 Here are the schematic and description. Attachments rs232_to_rs485.pdf 537.2 KB · Views: 494
C chintan_jagani New Member Mar 10, 2007 #3 Thank you for help. But, I am expecting a simpler circuit that I can use a part of my design.
3v0 Coop Build Coordinator Forum Supporter Mar 10, 2007 #4 This article from circuit cellar is a good one. I have used the one with a 555 on the 485 enable line. Take a look at it and feel free to ask question once you have read it.
This article from circuit cellar is a good one. I have used the one with a 555 on the 485 enable line. Take a look at it and feel free to ask question once you have read it.