SainSmart 5V 4 Channel Solid State Relay momentary switch

[StealthRT]

Hey all i am wanting to hook this relay up here:
**broken link removed**

What i am wanting it to be hooked too (output) is the pwr and reset switch on a PC motherboard to act as a momentary switch:
**broken link removed**

So i am thinking it would be hooked up like so:
**broken link removed**

And here is the schematic:
**broken link removed**

Thanks!

 

[panic mode]

so? go ahead, you have my permission

is this just an announcement to the world that you are ready to connect something or there is a question?


if you ask me, it is safe to connect according to you plan but it will not work.
main problem is that you are trying to use high voltage, high current, AC SSR to drive something that is DC, low voltage and low current.
i would also educe value of R1.

 

[panic mode]

why don't you use more appropriate device:
https://www.digikey.com/product-detail/en/VOL617A-3T/VOL617A-3TCT-ND/3340217

this is just one of many opto couplers that only cost fraction of a dollar and do the job.