3v0 Coop Build Coordinator Forum Supporter Dec 21, 2012 #1 I received a replacement unit and it is running at about 120 F, and without anything connected to the inputs 0 to 3 are low and 4 to 7 are high. I do not recall if the lines float high or low but I do think they should be all the same. I would like to check this prior to returning it. If anyone could check the temperature and the state of the pins without anything connected to them I would be grateful. Thanks Howard
I received a replacement unit and it is running at about 120 F, and without anything connected to the inputs 0 to 3 are low and 4 to 7 are high. I do not recall if the lines float high or low but I do think they should be all the same. I would like to check this prior to returning it. If anyone could check the temperature and the state of the pins without anything connected to them I would be grateful. Thanks Howard
dr pepper Well-Known Member Most Helpful Member Dec 24, 2012 #2 For those who are wondering the Saleae is a logic analyser.
DirtyLude Well-Known Member Dec 24, 2012 #3 Mine just showed them all high when I run a sample with nothing connected. It never even gets warm, so if to get hot, that would be enough for me.
Mine just showed them all high when I run a sample with nothing connected. It never even gets warm, so if to get hot, that would be enough for me.