bigal_scorpio
Active Member
Hi to all,
I am trying to recycle an LCD display unit from a car I scrapped, it was a ford granada and had a nice little LCD unit that I kept for future use.
The unit has 2 ICs on the back of the PCB and very little else (2 small SMT resistors I think) and nothing at all on the other side apart from the contacts for the LCD glass.
The connector for the unit from the cars main unit is a 6 way ribbon connector, 2 of which seem to go only to a pair of mini lamps that backlight the unit. The remaining 4 traces go to the ICs which are 40 pin SMT bearing the markings N7100050FDC000 and 435KA and finally kSM94442. They are Philips ICs but I can't get any info on them from the net.
Does anyone have any way of defining the serial connections?
If need be I can take close up pictures of the board and ICs.
Al
I am trying to recycle an LCD display unit from a car I scrapped, it was a ford granada and had a nice little LCD unit that I kept for future use.
The unit has 2 ICs on the back of the PCB and very little else (2 small SMT resistors I think) and nothing at all on the other side apart from the contacts for the LCD glass.
The connector for the unit from the cars main unit is a 6 way ribbon connector, 2 of which seem to go only to a pair of mini lamps that backlight the unit. The remaining 4 traces go to the ICs which are 40 pin SMT bearing the markings N7100050FDC000 and 435KA and finally kSM94442. They are Philips ICs but I can't get any info on them from the net.
Does anyone have any way of defining the serial connections?
If need be I can take close up pictures of the board and ICs.
Al