first off i hope its OK for me to do this in this forum..i guess i ll find out soon enough![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
here s the job description
i need 50 separate circuit boards that would create timers, based on a 555 chips which would be "ON" for approx 5 seconds and followed by an "OFF" time of 1 minute
and repeat this astable sequence indefinitely .now the circuit only needs to power up a standard size RC servo motor(ON for 5 sec) and the circuit should be as energy efficient as possible(during the 1 min off)
i have already done this circuit and is known to work well but i just don't have the time or the patience to make 50 of them, so i am looking to sub this job out for $$....any takers?
Voltage parameters 2-6 v.
MAX.anticipated current draw =standard RC servo motor (stalled)or (300ma)
BTW i use the servo as a gear case no pulses needed
i live in Oshawa Ontario Canada
here s the job description
i need 50 separate circuit boards that would create timers, based on a 555 chips which would be "ON" for approx 5 seconds and followed by an "OFF" time of 1 minute
and repeat this astable sequence indefinitely .now the circuit only needs to power up a standard size RC servo motor(ON for 5 sec) and the circuit should be as energy efficient as possible(during the 1 min off)
i have already done this circuit and is known to work well but i just don't have the time or the patience to make 50 of them, so i am looking to sub this job out for $$....any takers?
Voltage parameters 2-6 v.
MAX.anticipated current draw =standard RC servo motor (stalled)or (300ma)
BTW i use the servo as a gear case no pulses needed
i live in Oshawa Ontario Canada