Small timer

Status
Not open for further replies.

Niellles

New Member
Hello everybody,

I would like to construct a small electronic timer with a delay of 5 minutes.
It should have a 9V or 12V input. (input = output in this case)

I changed my physic classes for economics last year so it is kind of a problem for me.

I tried to find how to's on the internet, but didn't find a clear solution.

Would it also be possible to change the delay (I read something about different resitors...)

I know how to solder, I only need a scheme or something like that.

Any help/suggestions are greatly appreciated!

Cheers,
Niellles
 
I just told you, did you not read my previous post?

That circuit needs a transistor to boost the output and I there might be other things wrong too but it's too poorly drawn to make sense - I hate it when people just draw logic ICs as boxes without the internal gates.
 
I did read your post , but does it work for a delay of 5 minutes or more?
What do you mean with the R? :$
Is it a variabele resistor next to a 470K resistor (in serie), sorry never worked with variabele resistors
 
It's not the best solution for a 5 minute delay but it should work.

The resistor in the schematic should be replaced with a 1M variable resistor and a 470k resistor connected in series. If you don't know what this means, Google series circuits.
 
I know what series is , was just wondering if it was indeed a 1M and an another one next to each other!
Thanks, will try this one
 
Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…