SNES Multi Out

[Bravada]

Hello everyone.

I am looking to make my own multi out conector. Does anyone have this and is there any way you can use a continuity tester to pin point the connecors for the left and right audio and video. so I can pinpoint my connections to the mainboard and solder in my own hook up?

[/img][/list]



I would appreciate this very much. Thanks, Bravada.

 

[Russlk]

If the PC board is two layer, you can follow the wiring visually. If it is multilayer, you will have to randomly probe the board until the connection is found.

 

[crust]

If it has regular left/right audo and composite/svideo for the video, you can buy a multiple distribution amp, they are around 20USD or so.

 

[Exo]

Hello everyone.

I am looking to make my own multi out conector. Does anyone have this and is there any way you can use a continuity tester to pin point the connecors for the left and right audio and video. so I can pinpoint my connections to the mainboard and solder in my own hook up?
I would appreciate this very much. Thanks, Bravada.

Also, video signal is 75-ohm so you'll probably need an amplifier if you want to split it