Stereo input on mono TV

[Eroz]

Thanks!

 

[tunedwolf]

If the TV is mono only, any stereo audio input should be mixed together and reproduced in the TV speaker

 

[Nigel Goodwin]

Yes, it will work perfectly, the stereo inputs from the SCART are simply joined together in a mono set.

 

[4pyros]

You need something like this;

 

[Nigel Goodwin]

You need something like this;

No you don't, all that's needed is the pins simply wiring together - in fact assuming it's a European set with SCART you don't even need to do that, it's already done inside the mono TV set.

 

[4pyros]

Nigel; The OP never said anything about SCART.

 

[Nigel Goodwin]

Nigel; The OP never said anything about SCART.

He doesn't have his location filled in either

But it makes no difference, phono (RCA) sockets are wired just the same - you don't require anything other than a piece of wire to make them mono.

 

[4pyros]

I think it depends on what the OP wants to feed the mono TV with.
I some cases like a cell phone its bad to short the left and right audio channels together.
So to error on the side of caution, I suggested a resister based mixer circuit.
We will not realy know what the OP needs unless we get more info.