Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
I've designed a counter that excludes a few numbers. I'm using multisim 9 to test the layout, but i can't figure out what to connect the clock pins to(all clocks are tied together...) Should i put a switch there?
The clock is for the input that you're counting. If it's a synchronous (not ripple) counter than all pins would be tied together. You can buffer them with an inverter or non-inverting buffer to reduce the input capacitance load but otherwise they can all be connected to the input source you're counting.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
