AtomSoft Well-Known Member Nov 5, 2008 #1 Ok i have a little project and wanted to know since i ordered some 74LS244's can i use 2x CD74HC125 - "High-Speed CMOS Logic Quad Buffer, Three-State" To Replace 1x 74LS244 "OCTAL BUFFER/LINE DRIVER WITH 3-STATE OUTPUTS" ? as a temp solution since its all on a breadboard right now anyway.
Ok i have a little project and wanted to know since i ordered some 74LS244's can i use 2x CD74HC125 - "High-Speed CMOS Logic Quad Buffer, Three-State" To Replace 1x 74LS244 "OCTAL BUFFER/LINE DRIVER WITH 3-STATE OUTPUTS" ? as a temp solution since its all on a breadboard right now anyway.
saturn1bguy New Member Nov 5, 2008 #2 AtomSoft said: can i use 2x MM74HC125 to replace 1x 74LS244 as a temp solution since its all on a breadboard right now anyway. Click to expand... Yes. Just keep in mind the 'HC125s can't do nearly the same output current as the 'LS244 (as they're line drivers), and that you may need some pullups (3.3k) on the inputs to the 'HC125s if driven by TTL. I assume you're running both at 5V.
AtomSoft said: can i use 2x MM74HC125 to replace 1x 74LS244 as a temp solution since its all on a breadboard right now anyway. Click to expand... Yes. Just keep in mind the 'HC125s can't do nearly the same output current as the 'LS244 (as they're line drivers), and that you may need some pullups (3.3k) on the inputs to the 'HC125s if driven by TTL. I assume you're running both at 5V.
AtomSoft Well-Known Member Nov 5, 2008 #3 i need to run both at 5v but the issue is im using the parallel port from a PC and not sure the power it give (signal voltage/current) Found some info: HowStuffWorks "How Parallel Ports Work" 5v is a logical 1 cool! Last edited: Nov 5, 2008
i need to run both at 5v but the issue is im using the parallel port from a PC and not sure the power it give (signal voltage/current) Found some info: HowStuffWorks "How Parallel Ports Work" 5v is a logical 1 cool!