Dr_Doggy
Well-Known Member
as we may know i went a little crazy after purchasing a few ip cameras:
here's some 3d!:
photo 1 & 2 are two cams mounted on the wall, unaligned at the moment, but with i little software was able to design this first stereo image(look close you will see a CD hang in the center of room), when i have time ima try to re-encode it so instead of Red/Blue it will work on 3d full color tv.
Thermal images:
here is a $100 TPA81 hot glued and aligned to the bottom horizontal pixels, i have also opened up the camera and found a port for incoming only 232 data (from web, to cam , to data wire), so with a little android code i created this platform, with various other components, but you can see the camera image in the bottom right, and sliders to zoom in on thermal range as well as zero, default at ambient, unfortunately as i said cam is only one way so micro-controller controls are using Bluetooth:
https://image.dhgate.com/albu_291350939_00/1.0x0.jpg
scan takes about 1.5min, but only since i have scan wait until webcam has responded through web that it receives command..
thought you guys would like
here's some 3d!:
photo 1 & 2 are two cams mounted on the wall, unaligned at the moment, but with i little software was able to design this first stereo image(look close you will see a CD hang in the center of room), when i have time ima try to re-encode it so instead of Red/Blue it will work on 3d full color tv.
Thermal images:
here is a $100 TPA81 hot glued and aligned to the bottom horizontal pixels, i have also opened up the camera and found a port for incoming only 232 data (from web, to cam , to data wire), so with a little android code i created this platform, with various other components, but you can see the camera image in the bottom right, and sliders to zoom in on thermal range as well as zero, default at ambient, unfortunately as i said cam is only one way so micro-controller controls are using Bluetooth:
https://image.dhgate.com/albu_291350939_00/1.0x0.jpg
scan takes about 1.5min, but only since i have scan wait until webcam has responded through web that it receives command..
thought you guys would like