lol, ya , i luv these flybacks, but its too big(volume), all i really want is the 2ndry coil and the core, but the blodys all glued together, so i can get the secondary out ok, but i keep shatterin the core, ,, i wanna actually set a few up in series on the same core, and form my own primary loop.
In another expirment i had a 57khz flyback(running off a 2n3055 + sine generator) , when i took the leads from the primary coil , and put them on the feedback loop , the resonant frequency went up to 420khz , and my voltage potential trippled, this also cut my current draw from 0.50 A (which is typical for flybackdriver circuit) to 0.08A, however i need to resort to plan b since im haveing problems with a 5-9v clock ringing that fast (iv used 555 timers and hex inverter clks)