Hello guys, this is the first time that I post here in this website so I hope it will be a good beginning ,
My mini project is about " transmitting & receiving data " , the system I am going to implement is as shown in the figure below , have a time to look on it….
All right, the explanation :
This system is consists of 1-data to be transmitted
2-multiplexer
3-transmission media ( assuming some delay)
4- demultiplexer .
5- the receiver's clock initiator ( the ? block diagram )
& finally 6- the output monitors (" lamps speakers ,or any thing")
The idea of this system is as simple as it , only transmitting data using multiplexer , the data I want to transmit consists of 16 input (16 bit) ( in the sketch I only used 4 input as a beginning ), since the clock at the receiver has to be synchronized with the data received ,
I have decided to make the first input (the first transmitting bit ) always 1 ,
So the clock only be operated if the bit 1 just been received ,
My problem is what is the components that make the clock at the receiver works as that ,
if I used a group of one shot it will need more than 5 of them to do that, until that there will be no synchronizing at all, because of the delay between the clock and the data received & delay accumulation …..
so please help me to find out the best connection for my project .
photon
2105006 .
My mini project is about " transmitting & receiving data " , the system I am going to implement is as shown in the figure below , have a time to look on it….
All right, the explanation :
This system is consists of 1-data to be transmitted
2-multiplexer
3-transmission media ( assuming some delay)
4- demultiplexer .
5- the receiver's clock initiator ( the ? block diagram )
& finally 6- the output monitors (" lamps speakers ,or any thing")
The idea of this system is as simple as it , only transmitting data using multiplexer , the data I want to transmit consists of 16 input (16 bit) ( in the sketch I only used 4 input as a beginning ), since the clock at the receiver has to be synchronized with the data received ,
I have decided to make the first input (the first transmitting bit ) always 1 ,
So the clock only be operated if the bit 1 just been received ,
My problem is what is the components that make the clock at the receiver works as that ,
if I used a group of one shot it will need more than 5 of them to do that, until that there will be no synchronizing at all, because of the delay between the clock and the data received & delay accumulation …..
so please help me to find out the best connection for my project .
photon
2105006 .