Thanks for the input guys. Torben, I could draw a schematic, but that would end up looking lika a cabinet and muddying up the water. Steve, I could drop the input voltage to my IR's without too much trouble, I just happen to have a 12V supply available when I was playing around, and worked eveything off of that. If I change the resistor that I have now I can get down to a 6V Input. If you could sketch up something (remembering who you are dealing with here) that would be great. This is all really about asthetics and the fact that I am being a bit anal about too many cords sticking out of my track. It is a portable unit and I am trying to keep it as neat as possible. I like what you have there Ken, the $$ isn't the issue (see anal above). Looking at the specs for this unit though, I am concerned that the max input for this unit is only 14V and we might fry it when we crank up the juice on the power supply.