L laispais New Member May 26, 2023 #1 Im going to relocate the batteries in the xbox controller to where the rumble motors used to be. So I need some wire to connect the batteries to the circuit board. How thick wire should I use?
Im going to relocate the batteries in the xbox controller to where the rumble motors used to be. So I need some wire to connect the batteries to the circuit board. How thick wire should I use?
crutschow Well-Known Member Most Helpful Member May 26, 2023 #3 It would be a small current, so common 22AWG insulated hookup wire (stranded or solid wire) (example) should be adequate. Upvote 0 Downvote
It would be a small current, so common 22AWG insulated hookup wire (stranded or solid wire) (example) should be adequate.
Tony Stewart Well-Known Member Most Helpful Member May 26, 2023 #4 Do you want to know the technical critieria for selection, or just be told what to use? Upvote 0 Downvote
L laispais New Member Oct 29, 2023 #5 crutschow said: It would be a small current, so common 22AWG insulated hookup wire (stranded or solid wire) (example) should be adequate. Click to expand... Would 26 be ok? Upvote 0 Downvote
crutschow said: It would be a small current, so common 22AWG insulated hookup wire (stranded or solid wire) (example) should be adequate. Click to expand... Would 26 be ok?
ZipZapOuch Well-Known Member Most Helpful Member Oct 29, 2023 #6 laispais said: Would 26 be ok? Click to expand... If you removed the rumble motors, then 26 gauge is likely ok. It can handle 2.2-amps for chassis wiring. Upvote 0 Downvote
laispais said: Would 26 be ok? Click to expand... If you removed the rumble motors, then 26 gauge is likely ok. It can handle 2.2-amps for chassis wiring.