Amplifier help

Status
Not open for further replies.
mneary said:
Since most users of video amps have historically been using RGB, that's the most common (and therefore most available and usually cheapest) product.
Click to expand...

Here my requirement is video distribution (one composite video has to be distributed to many channel modulators - of course a special requirement), not for driving a CRT.
 
Drivers are commonly made for driving 75 ohm cables, which is probably how you'll be distributing your signal to the various modulators. It is best to use one driver for each cable, in which case you'll use three or more amplifiers.
 
mneary said:
Drivers are commonly made for driving 75 ohm cables, which is probably how you'll be distributing your signal to the various modulators. It is best to use one driver for each cable, in which case you'll use three or more amplifiers.
Click to expand...

I have to feed same video to nine modulators. Is it a must to use 9 separate drivers? (the video source and modulators will be physically close)
 
It really depends upon the quality you want, and the electromagnetic environment in your rack.
 
premkumar9 said:
Yes. One is RS components India. But problem is that price is 5 to 15 times the open market price for small quantities less than 10 (including their postage charge). Is the case with Digikey different?
Click to expand...
Poor you.

We have RS components here in the UK too. They're aren't the cheapest of places but the postage is free which is the main reason why I like them.
 
Hero999 said:
Poor you.

We have RS components here in the UK too. They're aren't the cheapest of places but the postage is free which is the main reason why I like them.
Click to expand...

Have you ever compared price of a component from local shop and from RS components?
 
mneary said:
It really depends upon the quality you want, and the electromagnetic environment in your rack.
Click to expand...

Can you please elaborate a little how driving from the same amplifier and electromagnetic environment in the rack may affect the quality of my video signal?
 
premkumar9 said:
Have you ever compared price of a component from local shop and from RS components?
Click to expand...
It depends on what you're buying.

Maplin's is the nearest shop that sell components and they're about the same price as RS and only stock one tenth of the range.

Rapid Electronics are much cheaper than RS but they charge £3.50 for delivery on orders under £35.
 

Here it is different. For example I got DS1307 for Rs 35/- from market. RS price is Rs 317/-
ADC 0804 - Rs 60/- in market and Rs 364/- for RS
 
Status
Not open for further replies.

Similar threads

S
  • Question
Stereo to mono class-d amplifier
2
Replies
26
Views
8K
audioguru
  • Question
Rookie needs help to understand why his A-class amplifier doesnt work (measurements and schematic attached)
2 3
Replies
53
Views
6K
GreenGecko7
  • Question
Help in reduce circuit losses
2 3
Replies
53
Views
3K
ZipZapOuch
  • Question
How to modify/ design error amplifier compensation circuit (with TL431) for variable flyback converter and make it stable.
Replies
2
Views
3K
ChrisP58
  • Question
LIC Protection - request for help
Replies
12
Views
2K
GH Crash
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…