Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

ATTIC fan project

Status
Not open for further replies.

kenbo90

New Member
Greetings all,
I bought a solar powered attic fan that I would like to also run via ultility power. The motor is rated for 36volts/13amps. The panel is only a 30watt, so I figure 18v at approx 2-3 amps. What are some ideas for attaching to ultility. I have access to a13v/13amp power supply or can I just hook up a large rheostat directly to a 15amp outlet?
 
Please check your numbers! 36v x 13a = 468w. A 30w solar panel will not do much for this big fan! Is the fan motor AC or DC?
 
Its actually a relatively small fan in stature 2.5x5in. As far as im aware its a DC motor and that 36/13 were the numbers listed on the label. I am surprised that 30w does the trick but I'm assuming it was designed at variable power input and not needing very much. The motor is 10 ohms and it was only running on 3volts when I checked it with little sun left yesterday. I was thinking of using the bigger supply and like a 50ohm 150watt pot, but now im thinking its still to much much for this motor.
 
Can you tell us all the info on the motor label?
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top