I couldn't find the code on those sites, mostly errors. Unless you have a very compelling reason I would just find another project to work from. Googling "ATmega16 wand pov" returned several good results, most with code included.
I couldn't find the code on those sites, mostly errors. Unless you have a very compelling reason I would just find another project to work from. Googling "ATmega16 wand pov" returned several good results, most with code included.
The first result for "ATmega16 wand pov" is **broken link removed** which is what you want, hand powered, uses an ATmega and has the source right on the page.
Third result is also promising. **broken link removed**
The first result for "ATmega16 wand pov" is **broken link removed** which is what you want, hand powered, uses an ATmega and has the source right on the page.
Third result is also promising. **broken link removed**
the basics of that circuit is the same of many others over the web, but the original name is "Propeller Clock".
the original uses a motor to turn the LEDs around, this guy is using the hand instead.
And he gave it another name.
i've made one years ago with the LEDs fixed in 6mm holes on a spinning vinil record.
for those who may inquire i did not use the turntable.
it has to be a (not much) faster motor. Actually turning it hard by hand would be enough.
if i were to "innovate" a "Propeller Clock" to be handheld, i'd put an accelerometer in it to detect the hand range of movement.